• Home
  • General
  • Stock Compact Rules
  • Stock Full Size Rules (wi
  • Mild Compact Rules
  • Mild Full Size Rules
  • Mini Vans Mini Trucks
  • Youth Rules
  • Full Size Trucks
  • GSP Modified
  • Schedule
  • Waterford Entry
  • Spartansburg 2019 pics
  • Venango Fair 2019 pics
  • mdm covid classic pics
  • buckeye bash 2020 pics
  • Venango Fair pics 8-14-21
  • Venango Fair pics 8-7-21
  • Spartansburg Fair 2021
  • Waterford Fair 9-7-21
  • Venango Fall Show 2021
  • Turkey Bowl 11-13-21
  • About
  • Cochranton 4-23-22
  • MDM3 / 5-21-22
  • Cochranton 6-26-22
  • More
    • Home
    • General
    • Stock Compact Rules
    • Stock Full Size Rules (wi
    • Mild Compact Rules
    • Mild Full Size Rules
    • Mini Vans Mini Trucks
    • Youth Rules
    • Full Size Trucks
    • GSP Modified
    • Schedule
    • Waterford Entry
    • Spartansburg 2019 pics
    • Venango Fair 2019 pics
    • mdm covid classic pics
    • buckeye bash 2020 pics
    • Venango Fair pics 8-14-21
    • Venango Fair pics 8-7-21
    • Spartansburg Fair 2021
    • Waterford Fair 9-7-21
    • Venango Fall Show 2021
    • Turkey Bowl 11-13-21
    • About
    • Cochranton 4-23-22
    • MDM3 / 5-21-22
    • Cochranton 6-26-22
  • Home
  • General
  • Stock Compact Rules
  • Stock Full Size Rules (wi
  • Mild Compact Rules
  • Mild Full Size Rules
  • Mini Vans Mini Trucks
  • Youth Rules
  • Full Size Trucks
  • GSP Modified
  • Schedule
  • Waterford Entry
  • Spartansburg 2019 pics
  • Venango Fair 2019 pics
  • mdm covid classic pics
  • buckeye bash 2020 pics
  • Venango Fair pics 8-14-21
  • Venango Fair pics 8-7-21
  • Spartansburg Fair 2021
  • Waterford Fair 9-7-21
  • Venango Fall Show 2021
  • Turkey Bowl 11-13-21
  • About
  • Cochranton 4-23-22
  • MDM3 / 5-21-22
  • Cochranton 6-26-22

2022 GSP STOCK COMPACT RULES (WINDSHIELD)

  

PLEASE OBSERVE ALL GENERAL RULES @gspdemoderby.com


  • 1. If it is NOT LISTED in these rules DON’T DO IT
  • 2. NO GREY AREAS, ASK FIRST
  • 3. Stock classes are meant to be simple for fun, entertainment, and a great place for beginners or a quick, cheap build for anyone. This is a class for the driver and a little bit of luck like the old days
  • 4. Officials Discretion Final on all rules and failure to follow rules will result in being bumped up to Mild class where available.
  • 5. No Refunds 
  • 6. All Repairs must be approved
  • 7. ALL VEHICLES MUST GO TO STAGING/LINEUP after passing inspection
  • 8. DRIVER ONLY at INSPECTION
  • 9. All GLASS and DEBRIS must be swept from vehicle before you arrive to venue
  • 10. SEE ALL GENERAL RULES AS WELL AS COMPACT/ MIDSIZE STOCK

  • 1. Any Compact Sub frame passenger Vehicle that qualifies for our regular 4 Cylinder (104.1” Wheelbase or less-EXCLUDES 92-96 CAMRY since 2020) or 4/6 Cylinder Mid Size class up to 108” wheelbase (Except G Body. NO full frame, ALL 92-UP CAMRYS run MIDSIZE just like all other promoters) NO AWD, front or rear axle must be disconnected. 4 Cyl Compact and 4/6 Cyl Midsize classes will be combined or separated as designated per event. See individual event for that designation. [4 Cyl Compact Class exclusive to GSP events]
  • 2. Stock, Compact, TIN bumpers may be used, may be butt welded, bolted, AND or chained to FACTORY bumper shock. No added metal. If chain is used max 1 link may be welded to frame, this is only to keep bumper from falling off.  NO Additional chain may  be used. No Hard Nosing, must use factory mounting setup for that car. Two separate Single strands of #9 wire may go from bumper to top of core support ONLY, sheet metal to sheet metal ONLY, No added metal or mounts of any kind.
  • 3. No shortening or modifications to crush areas or frame
  • 4. All subframe mounts to remain stock
  • 5. No prebending/ creasing/wedging/dipping etc (Minor creasing/hammering may be done in line up after inspection)
  • 6. No carb conversions
  • 7. Headers allowed in all GSP Classes
  • 8. Battery and gas tank may be moved into passenger area, secured, covered, and leak proof.
  • 9. All components including Suspension and Steering must remain factory stock with the exception of aftermarket shifters allowed. No aftermarket parts allowed including but not limited to slider drive shafts, steering columns, protectors of any kind,  transmission coolers, cradles, tie rods, gas/brake pedals, etc
  • 10. 1 Front window bar or chain mandatory Max 3” wide, welded or bolted to first 2” of roof or cowl only
  • 11. Back seat bar strongly recommended. 4 point cage allowed, Max 4”. 6x6” Max end plates ok.  Gas tank shelf allowed, must come off of back seat bar and be a MINIMUM 8” off from any and ALL surfaces (floor, decks, humps, tunnels, trays, etc). Side Bars not to exceed 12” past driver door pillar. May have a back plate to protect tank straight up and down ONLY, Halo bar for safety allowed, must be straight up and down (Perpendicular to the ground) and attach only to back seat bar. NO Down legs other than driver side for driver protection (max of 2 to sheet metal only off side bar-nothing excessive) All cages must be safe and secure.
  • 12. You may pre notch (NOT pre bend) frame, no added metal or repair of notch in any way
  • 13. Frame must remain 100% stock other than rule  #12, body mounts must remain stock as well 
  • 14. Driver’s door may be welded Max 3” wide and may be reinforced and or plated, NOT to exceed 2” beyond driver’s door  seams. All reinforcement of door MUST BE FLAT (no angle, c channel, tubing, etc for other driver protection) All other doors may be wired, bolted, or banded, belted 4 per door. Welded driver’s door counts as FRONT 2 spots for back driver side door on a 4 door vehicle. Pillars may be duct taped AFTER inspection
  • 15. Rear axle of vehicle must remain stock other than welding posi for all stock classes
  • 16. Tires must be DOT approved, max 8 ply, tubes OK, NO Mining, implement, tow motor, or skid tires allowed. No Sidewall protectors or flappers. NO VALVE STEM PROTECTORS. 
  • 17. Hoods and trunk lids may be wired, chained, seat belted shut in Max 6 places after inspection, no added metal or washers. Can Not attach to bumper. Each lid must have a 12x12 opening.
  • 18. Any and all factory components must be used in factory intended use, this applies to seat belts, suspension, or any other creative cross uses. Other than driver’s, seatbelts should be removed or cut out.
  • 19. No Additional wire/chain/bolts anywhere. No Fender, Hood, Trunk, or Roof  bolts.
  • 20. Rear window may have SINGLE wrap strand of #9 wire perpendicular(Up and Down),sheet metal to sheet metal only, within the first 3” of rear of roof lip, attached to speaker deck in factory location, and may be twisted tight only. No horizontal wiring
  • 21. Bumper length not to exceed outside width of stock/straight tire position (Safety)
  • 22. Any and all repairs to stock class prerun cars must be approved by officials via Facebook messenger or other approved means of communication. #9 wire limited use for repairs, ask first!!
  • Once again this stock class is meant to be simple, fun, and a great place to get beginners into the sport. 

GSP Demo Derby

Copyright © 2022 GSP Demo Derby - All Rights Reserved.

Powered by GoDaddy Website Builder